The partition wall of purifying color steel plate is commonly used, but the unqualified acceptance of the project of purifying plate partition wall also occurs from time to time due to the quality of plate or construction problems. Today, the editor of jingpoxing purification project will take you to understand
1. The main materials, finished products and semi-finished products used in the project shall be inspected carefully to see if they meet the design requirements, and the defective materials shall not be used.
2. All kinds of materials entering the site shall be stored in a clean and dry environment with enclosure facilities, and shall be placed flat on the damp proof membrane.
3. Wood materials and other materials that do not meet the requirements of cleanliness standards are not used in the clean room.
4. Selection of color steel plate and aluminum profile.
5. All internal and external corners of the partition wall in the clean area are connected by integral arc aluminum alloy parts, and a special arc skirting line is used between the partition wall and the ground, with an arc radius of R = 50.
6. All doors adopt stainless steel purified handle type lock, the distance between the lock cylinder and the door edge is more than 65mm. All the locks that can lead to the outside of the clean area, except the lock cylinder with the key, the others are not equipped with the key.
7. The surface of the color steel plate is straight and straight, the bending place is straight, the size of the template has no error, and the color steel foamed plate is not allowed to have integral arch and depression.